TECHNAL

FB Aluminium Window

Features:

  • 46mm-wide tubular profile with 15mm, 22mm and 42mm chambers.
  • Mitre-cut using self-locating, pin or crimp corner cleats.
  • Architraves held in place using stainless clips. Screwed or clipped architrave
  • 55mm-wide tubular profile with 15mm, 22mm and 42mm chambers.
  • Mitre-cut using self-locating, pin of crimp corner cleats.
  • 6-33mm. Up to 57mm with rebate adaptor.
  • Easy to fabricate

Performance:

  • Air, water tightness, wind resistance and thermal performance in accordance with the European standards.
  • Acoustic: soundproof up to 35 dB(RA,tr).

GB Aluminium Window

High performance, cost-effective

  • Rollers bearing loads of up 200kg per leaf.
  • Aluminium rails accommodating 2,4, 6 or 8 leaves.
  • Separate roller tracks.
  • Accomodating up to 26 mm multi-performance glazing.
  • Three upright solutions for customising size accommodating optional roller shutter (depending on wind exposure).

Locks and handles a full range

  • Single and double automatic thumb pulls with key (window).
  • 3-point locks.
  • Pull handle with thumb pull (window and patio-door).

Elegant and attention to detail inside and out

  • Glazing gaskets have small flashings allowing maximum daylight.
  • Black or grey gaskets.
  • Round design for opening frame.
  • Bi-color for frame

Composite frames

  • Compatibility between B casements and sliders.
  • Wide-range of possible compositions using both types of frame

FXI Aluminium Window

Features

  • A framing system which is fully drained and pressure equalised to minimise the build up of water.
  • Flush EPDM gaskets for weatherproofing and glazing guarantee quality and further enhance the appearance of the window.
  • The systems can be used for punched hole, composite and ribbon window applications, and both new build and refurbishment schemes.
  • A wide selection of window furniture is available, including espagnolette and cockspur handles, and Technal's ergonomically designed tilt/turn handle, which can be colour matched to project requirements.
  • Options for single or double colors.
  • The windows in the FXi suite can be inserted into Technal's curtain walling to naturally ventilate the building and allow additional design flexibility.
  • The range offers a wide choice of configurations, including fixed lights, top, side and bottom. hung and tilt/turn.
  • FXi can be supplied in a wide choice of polyester powder coated or Anode finishes and in Technal's exclusive palette of striking flecked gloss colors.

High-quality standard

  • NF French Standard label for sections with thermal break (French CSTB-approved thermal break).
  • Thermal insulation: in accordance with RT2000, values calculated as per CSTB-validated The-bat 2001 regulations.
  • Air, water and windproof in accordance with European standards.
  • Acoustics: up to 35 dB (RA, tr).

Security

  • Specific solutions for reinforced anti-break-in security.
  • Sections and accesories designed for large dimension frames.
  • Up to 130 kg for tilt-and-turn frames.
  • Glazing up to 35 mm for high-performance glass panels.

PPM DOOR

Features

  • A framing system which is fully drained and pressure equalised to minimise the build up of water.
  • Flush EPDM gaskets for weatherproofing and glazing guarantee quality and further enhance the appearance of the window.
  • The systems can be used for punched hole, composite and ribbon window applications, and both new build and refurbishment schemes.
  • A wide selection of window furniture is available, including espagnolette and cockspur handles, and Technal's ergonomically designed tilt/turn handle, which can be colour matched to project requirements.
  • Options for single or double colors.
  • The windows in the FXi suite can be inserted into Technal's curtain walling to naturally ventilate the building and allow additional design flexibility.
  • The range offers a wide choice of configurations, including fixed lights, top, side and bottom.
  • hung and tilt/turn.
  • FXi can be supplied in a wide choice of polyester powder coated or Anode finishes and in Technal's exclusive palette of striking flecked gloss colors.

High-quality standard

  • NF French Standard label for sections with thermal break (French CSTB-approved thermal break).
  • Thermal insulation: in accordance with RT2000, values calculated as per CSTB-validated The-bat 2001 regulations.
  • Air, water and windproof in accordance with European standards.
  • Acoustics: up to 35 dB (RA, tr).

Security

  • Specific solutions for reinforced anti-break-in security.
  • Sections and accesories designed for large dimension frames.
  • Up to 130 kg for tilt-and-turn frames.
  • Glazing up to 35 mm for high-performance glass panels.

GTI Door

Sober lines and smooth operations

PPM range is a folding door system adapted to configurations requiring wide opening. It exists in two versions, suspended or supported in 3, 4 or 6 leaves.

Folding door

Features

Simplicity : opening frame – 34 mm module, fixed frame – 44 mm module Infill volumes: from 6 to 20 mm Weight : up to 40 kg per leaf for a suspended folding door and 60 kg for a supported folding door Endurance: 18,000 opening cycles for a 3 leaf door.

PPM door offers sober lines and smooth operation for a maximum opening. It is ideal for shops, malls, bars, restaurant, conservatories, etc.

Product concept:

42x52 mm open profiles, 55x44 mm lateral mullion, adjuster clip to ensure tightness at the top of the rail, roller rail for suspended version or guide rail for supported version. The ergonomics of the handles and the guiding system make it very easy to open and close the leaves In supported version, in the bottom part of the door, a carriage mounted on needle bearings slides in the threshold section In suspended version, a hinge fitted with guiding rollers slides in the rail section. Jacks positioned on the guiding rail absorb the differences in ground level.